Suggested Retail Price: "Classic" One-Pfoot $49.95
Replacement Parts for Vintage and New PFLUEGER MEDALIST Reels
The "Classic" One-Pfoot
One-Pfoot components are made from the highest grade aluminum (T6061 Grade) and stainless steel (303) to insure that the One-Pfoot will last as long as Granddad’s favorite Medalist.
We strive to keep these venerable old classics in the best condition possible.
We have found that most parts are interchangeable.
We have also learned that there can be subtle differences between reels. Sometimes these differences call for a minor adjustment or “tweaking” to make the reel perform to its fullest. Most adjustments, we have found, are rather easy fixes that can be performed at home or in the shop with the simplest of tools.
Suggested Retail Price: "Classic" One-Pfoot $49.95
Ordering the Correct "Classic" One-Pfoot
The "Classic" One-Pfoot comes in two different widths:
The narrow model accommodates the narrow spool models, such as the 1492, 1494, 1495, and 1496.
The wider 1" version will fit the wider 1492-1/2, 1494-1/2, 1495-1/2, 1496-1/2 and 1498 models.
These feet also come with a set of four screws. Please specify if want our “Old Screws” or our “New Screws” with your new “Classic” One-Pfoot.
Many of the older prewar feet were much too long to fit on our modern day reel seats.
We have the "New Young Pfoot' and the "Old Young Pfoot" in a lightweight aluminum bar stock model, and, in a solid brass model for the more classic look.
The "New Young Pfoot" was especially designed to fit the more modern postwar J.W.Youngs. It will allow you to use your J.W. Young reel on the most delicate of slide band reel seats and the narrowest of screw lock seats.
The easiest way to tell if you need a "New Young Pfoot" for your reel is to carefully detach the existing foot that is on the reel. By looking at the foot where it mounts on the reel, observe whether it is flat or curved. If your reel foot has a flat surface then your reel will take a "New Young Pfoot"
"New Young Pfoot"Aluminum
"New Young Pfoot" Brass"
The "Old Young Pfeet" are the feet that were designed for use on those older classic, unmarked J.W.Youngs. Our pfoot has been shortened from the original long square ended foot that is most usually seen on the older Youngs. These new pfeet will easily allow you to convert your prewar classic Young reel so that it will fit the reel seats of yesteryear, and also, the reel seats of the present modern era.
Again, you can tell whether you need a "Old Young Pfoot" by carefully taking off the original foot that came on the reel and examining the where it mounts to the reel. If the original foot has a curved surface, then you will need to order the "Old Young Pfoot".
"Old Young Pfoot" Brass
Suggested Retail Price: Brass "Young Pfoot" $39.95
"Old Young Pfoot"Aluminum
SuggestedRetail Price: Aluminum "Young Pfoot" $34.95
One-Pfoot replacement reel foot for Pflueger Medalists! One-Pfoot components are made from the highest grade aluminum (T6061 Grade)
and stainless steel (303) to ensure that the One-Pfoot
Available in two sizes:
One-Pfoot 1 for
1492, 1494, 1495, 1496
One-Pfoot 2 for
1492-1/2, 1494-1/2, 1495-1/2, 1498
Suggested Retail Price: $27.95
Suggested Retail Price: $21.95
This is our original counterbalance, made as a counterweight to the Medalist handle.
This counterbalance is most generally adapted to the more modern (1960s and onward Medalist) that have 0.250 diameter spool holes. The all stainless counterbalance and stainless backing screw have been highly polished to eliminate any burrs that might interfere with line control and smooth line running. They come with a hex head wrench and are easy to install. See guidelines below for determining correct size for your reel.
These small diameter counterbalances are made especially for those older Medalists that have the 0.220 diameter spool holes such as those found on many older 1300, 1400, and 2000 series Medalists. This little “gem” of an add-on is just the answer. The all stainless counterbalance and stainless backing screw have been highly polished to eliminate any burrs that might interfere with line control and smooth line running. They come with a hex head wrench and are easy to install. They will add beauty to any vintage Pflueger Medalist without detracting from its value.
Made of highly polished nickel-silver with stainless backing screw. They come with a hex head wrench and are easy to install.
Made of highly polished nickel-silver with stainless backing screw. They come with a hex head wrench and are easy to install.
Suggested Retail Price for all Counterbalances: $16.50
Here's a quality machined replacement spool latch cover for all those cracked, warped, or lost ivory plastic originals. This cap is an exact replica of the early aluminum Medalist spool covers. Carefully machined and milled to exact tolerances, this spool cover will give your treasured Medalist Pflueger a sparkle.
Suggested Retail Price: $27.50
Proclaim your love of Pflueger Medalists to the world with this unique and distinctive hat pin!
Suggested Retail Price: $27.50
_________________________
One-Pfoot Brake Adjusting Screws
One-Pfoot's brake adjusting replacement screw is made of 304 stainless steel featuring the delicate CNC turned 4-36 left hand thread that has been used forever by Pflueger. This part, along with One-Pfoot's Spool Latch Cover and Replacement Handle, will allow you to resurrect your old Pflueger by replacing the plastic parts that frequently deteriorated on this beloved reel. The brake adjusting screw comes with complete installation instructions and illustrations.
Suggested Retail Price: $23.95
Here’s the oval slotted head screw that most Medalist owners are familiar with. This highly polished stainless screw will enable you to resurrect those discarded, idle, Medalist reels.
Suggested Retail Price for all screws: $14.95 for a package of 12
____________________________________________________________________________________________________________________________________________________
Suggested Retail Price for package of 3: $6.50
Suggested Retail Price for package of 3: $6.50
The One Pfoot Replacement Handle .
Over the years Pflueger produced a wide variety of injection molded handles, particularly in the early years of this reel.
Suggested Retail Price: $16.50
One-Pfoot replacement handles
The One-Pfoot Replacement Handles are currently made with strong synthetic materials, available in the following colors:
Butterscotch
Cream
Swirl
Sculpted Pillars for the narrow (1492, 1494, and 1495 models) Pflueger Medalists. We carry attractive and functional replacements for those straight, chrome-plated, brass pillars that grace many of the more modern (early 1950s to present) Medalist.
These delicate looking Sculpted Pillars are made to look like the original pillars that made the early Medalist such a distinctive reel. They are machined of 6061T6 aluminum and then hard coat anodized to insure a long life with a minimum of wear and scratching. The older original Medalist sculpted pillars were pinned to the reel frame with a Type U drive screw. Our Sculpted Pillars are drilled and tapped with a roll form thread in each end insuring the best possible fit for the common 3-48 Medalist screws. These handsome add-ons will truly dress up your Pflueger Medalist!
Suggested Retail Price for Set of 3 Pillars with Old Screws or New Screws: $27.95
Tie Nail Knots Perfectly....
Every time
Announcing a new and exciting tool to the world of fly fishing! Suggested Retail Price: $6.50
Contact ...
Classic Fly Fisherman
Robert R. Selb
222 S. Broad Street
Lansdale, PA 19446
Visa and Master Card accepted, also check or money order. Pay Pal can be used on items or money order.
Please call: Toll Free:
Phone: